FINEMotorMagnetMaterialFile Version=1.0 ** All lines starting with ** are seen as comments ** The 2 first lines above are required and must NOT be erased or changed. Parameters **The next 3 lines must be the name and 2 magnet material parameters: Name=Y30 Ferrite/Ceramic 5 Br=3900 Hl=3714 **Note: Br (G) is the Remanence in Gauss (1G=0.0001T) **Note: Hl (Oe) is the Coercivity in oersted for B=0 (Extrapolated load line). **Note: Hl=Br/urec - urec is recoil permeability ** 1[kA/m]=4*pi[Oe] EndParameters ** Use these lines to add your own comments. ** More lines starting with ** can be added ** Then the list of magnet sizes should follow with no blanks or comment lines. Sizes : (OD; ID; Length;Name) 36.0; 18.0; 6.0; 36 x 18 x 6 45.0; 22.0; 8.0; 45 x 22 x 8 55.0; 24.0; 8.0; 55 x 24 x 8 55.0; 24.0; 12.0; 55 x 24 x 12 60.0; 24.0; 9.0; 60 x 24 x 9 60.0; 24.0; 12.0; 60 x 24 x 12 60.0; 30.0; 10.0; 60 x 30 x 10 72.0; 32.0; 10.0; 72 x 32 x 10 72.0; 32.0; 12.0; 72 x 32 x 12 72.0; 32.0; 15.0; 72 x 32 x 15 84.0; 32.8; 15.0; 84 x 33 x 15 90.0; 36.0; 17.0; 90 x 36 x 17 90.0; 42.0; 17.0; 90 x 42 x 17 100.0; 45.0; 18.0; 100 x 45 x 18 102.0; 42.0; 17.0; 102 x 42 x 17 102.0; 51.0; 18.0; 102 x 51 x 18 102.0; 51.0; 20.0; 102 x 51 x 20 102.0; 57.0; 17.0; 102 x 57 x 17 110.0; 45.0; 18.0; 110 x 45 x 18 110.0; 57.0; 20.0; 110 x 57 x 20 121.0; 42.0; 20.0; 121 x 42 x 20 121.0; 57.0; 17.5; 121 x 57 x 17.5 121.0; 57.0; 20.0; 121 x 57 x 20 134.0; 57.0; 20.0; 134 x 57 x 20 224.0;122.0; 23.0; 224 x 122 x 23 EndSizes
|