主题：给些常见软件的下载

上面的软件可以试试

此主题相关图片如下：1.jpg

功能强大的声学仿真软件。
此主题相关图片如下：2.jpg

此主题相关图片如下：3.jpg

谢谢楼主，哈哈哈

没找到SPEAK
记得原来有的

此主题相关图片如下：speak.jpg

PACSYS Limited develops, distributes and maintains the following products:

	PAFEC VibroAcoustics	Acoustic analysis software utilising finite element and boundary element methods.
	PafLS	Loudspeaker analysis tool.
	PAFEC-FE	Structural finite element analysis software catering for static, dynamic, non-linear and thermal analysis.
	PAFEC-EHL	Elastohyrodynamic lubrication software for the analysis of dynamically loaded plain bearings.

Mark Dodd
Head of Group Research, GP Acoustics (UK) Ltd
GP 声学（英国）有限公司研究团队领导人

    Having achieved a BSc in Physics from Southampton University in the UK Mark started his career in Audio at Vitavox in 1981 where he gained his first experience in compression driver design. After gaining an MSc in acoustics at Chelsea College London University he joined Tannoy where he developed the tulip waveguide on which he presented his first paper in 1992 at the AES. In 1994 Mark joined GPAcoustics, a group including KEF and Celestion becoming Head of Group Research in 2001. Since joining GPAcoustics Mark has pioneered the use of Finite Element Analysis in transducer design presenting a several papers on transducer design and Finite Element techniques at AES, IOA and ALMA conferences.

    1981 年，Mark Dodd 在英国南安普顿大学获得物理学学士学位后，加入 Vitavox 公司开始了他的音频事业生涯，在那里他获得了压缩策动单元设计的最初经验。在获得伦敦大学切尔西学院的声学硕士学位后，他加入 Tannoy 公司并在那里提出了郁金香波导管理论，他于 1992年在 AES 上发表了相关研究的第一篇论文。1994 年，Mark 加入了拥有 KEF 公司和 Celestion 公司的 GP 声学集团，并于 2001 年担任 GP 声学研究团队的领导人。自加入 GP 声学集团后，Mark开创性地使用有限元分析方法进行换能器设计，并在 AES、IOA 及 ALMA 会议上发表了关于换能器设计及有限元技术的一系列文章。

他所用的有限元软件就是PAFEC,可以仿真压缩驱动器的频率响应

PAFEC-VibroAcoustics - Audio

---

Air is a light medium and hence will generally have a lesser effect on a vibrating structure than in underwater acoustics. However the cone, dustcap and surround of a loudspeaker drive unit are also light, and hence to obtain accurate results a fully coupled analysis is necessary.

	Application Areas
		cone breakup cabinet cavity modes radiation from drive unit diffraction from edges placement of speakers in a small room radiation from panels horn design load/displacement computation for spiders and surrounds compression driver design

此主题相关图片如下：3dsinhorn-diag1-655x572.gif

此主题相关图片如下：f14000-429x310.gif

此主题相关图片如下：f14000amp-429x310.gif

                    谢谢                                                                                         

谢谢版主，能想到的都有了，好

FineXover用几分钟就会有个“应用监测“跳出来，然后就只能关掉软件，请问谁有解决办法？

需要关掉杀毒软件.

ed2k://|file|LOUDSOFT.FINECONE.v2.0.EMT36.ISO|68202496|4EDC97759775190F2279B880BECCCE3C|/

ed2k://|file|LOUDSOFT.FINEMotor.v2.5.EMT36.ISO|22026240|4ED6ED05C261DE566E5385113F0E7DC4|/