主题：做Pspice模拟的进来看看

我回去试了一下，发现自己用的orcad 9.2上的pspice 好像跟acoustics 版主用得不一样啊， 我找不到这种原件得设置

这是用哪个版本得pspice啊，我用得orcad 9.2 中得pspice 好像找不到上面那些图中 得设置，请各位高手给与指点

上面这些仿真用得pspice得哪个版本啊 ，我用得orcad 上得pspice，在设置元器件参数时，和上面这些图中不一样，仿真不了，可能是我方法不对，请各位高手给与指点

我用得orcad 中得pspice

里面得元器件设置和 版主贴的图中设置不一样啊 ，找不到那些设置

版主用得pspice得哪个版本啊

此主题相关图片如下：类比.jpg

此主题相关图片如下：简化类比.jpg

此主题相关图片如下：声阻率.jpg

此主题相关图片如下：细管.jpg

此主题相关图片如下：声质量.jpg

此主题相关图片如下：声顺.jpg

此主题相关图片如下：管子.jpg

此主题相关图片如下：穿孔板.jpg

好资料，顶了

居然看到中文翻译版了,内容似乎就是白瑞内克的<声学>中的.

版主用得pspice得哪个版本啊?

9.1学生版,免费的.

电路仿真软件PSPICE9.1:

ed2k://|file|Orcad%20Pspice%20v9.1%20Student%20Edition.rar|28129451|3166802BED710FB3EAE1578B60DFE265|h=XKUYYWTK3J2NPRLPLGBWYNVRSSWULCQU|/

谢谢，知道了，可能是我的方法不对

版本其实无关紧要,其他软件也可以.

主要是模型和计算.

About PSpice Schematics

©1999 OrCAD, Inc.

Schematics is a schematic capture front-end program with a direct interface to other PSpice programs and options.
You can perform the following tasks, all in one environment, using Schematics:

· design and draw circuits

· simulate circuits using PSpice

· analyze simulation results using the PSpice waveform viewer (Probe)

· graphically characterize simulation stimuli using the fully integrated Stimulus Editor, so stimulus definitions are automatically associated with the appropriate symbols

· graphically characterize simulation models using the fully integrated Model Editor utility (formerly known as Parts), so model definitions are automatically associated with the appropriate symbols

· interface to PSpice Optimizer for analog circuit performance optimization

An important prerequisite to building a schematic is the availability of the necessary devices in the form of symbols. Schematics has extensive symbol libraries and includes a fully integrated symbol editor for creating your own symbols or modifying existing symbols.

©1999 OrCAD, Inc.

呵呵，楼主我已经仿真出来了，谢谢