那位大虾能帮我看下下面测试阻抗曲线的BK程序那里有问题吗,计算出来的阻抗曲线是反向的。
或者有设定好的程序发个邮箱(XSQR@163.COM)也可以,小弟万分感谢!!!
B&K_2012
IMP CV
:Graph:SOurce_A Buffer
:Graph:Save_Curve
:Graph:SOurce_A Off
:Graph:SOurce_B Buffer
:Mode:Steady_State_R
:Steady_State_R:Sweep Log_Iso
:Steady_State_R:STArt_Frequency 20.000
:Steady_State_R:STOp_Frequency 10.00k
:Steady_State_R:Iso_Series R80
:Steady_State_R:Detector_Band 0.10
:Steady_State_R:Detector_Delay 0.00
:Steady_State_R:Detect_Max_Time 100m
:INPut:Input_Channel Direct
:INPut:Direct Single_Ended
:INPut:Direct_High_Pass 1
:LEvel:Input_Autorange ON
:LEvel:Max_Input_Abs 100m
:LEvel:Output_F1_Abs 1
:Graph:Operation XY_Axes_Graph_A
:Graph:X_Axis LOg
:Graph:X_Range 3.
:Graph:Y_Range 20.000
$:Please connect Dir.Input to IEA I SENSE then Proceed.
:Auto_Sequence:Event Proceed
:Auto_Sequence:Await_Event
:Mode:Steady_State_R
:STArt
:Auto_Sequence:Graph_Update
:Block_Arithmetic:Operation Reciprocal_Value
:Block_Arithmetic:Result Buffer_And_M1
:Block_Arithmetic:Label "IMPEDANCE "
:Block_Arithmetic:Operand_A M1
:Block_Arithmetic:Reciprocal_Val_A
:Block_Arithmetic:Operation SUbtract
:Block_Arithmetic:Result Buffer_And_M1
:Block_Arithmetic:Magn_K_Abs 1.000000
:Block_Arithmetic:Subtract_A_K
:Screen_Format:Display_A_And_B
:CUrsor:Z B,0
:CUrsor:X 100
:Auto_Sequence:Graph_Update